REACHMAT

Cheap 12″ vinyl. Full-length cuts. Up to 72 inches on one mat.

246810121416182022242628303234363840424446485052545658606264666870REACHMAThtvmat.com
Length 72″ · Width 13″
The gap

Standard mats stop at 24″.
REACHMAT keeps going.

72″

Machines built for 13″ matless rolls can cut long, but affordable 12″ rolls need a mat. REACHMAT is 13″ wide, so it loads like a roll and your 12″ material runs the whole length.

12×24standard mat
REACHMATREACHMAT 48
246810121416182022242628303234363840424446REACHMAThtvmat.com
246810121416182022242628303234363840424446485052545658606264666870REACHMAThtvmat.com
24″
48″
One pass

A 72″ banner won’t fit on a 24″ mat.

On a standard mat the cut stops where the mat stops. You have to split the design, cut it in pieces, and line the halves back up. On REACHMAT the whole banner goes in one pass.

Standard 12×24 mat Cuts 24″, then stops

HAPPY BIRTHDAYHAPPY BIRTHDAYMat ends at 24″The other 42″ won’t fit

REACHMAT 72 Cuts all 72″ in one pass

246810121416182022242628303234363840424446485052545658606264666870htvmat.comHAPPY BIRTHDAY
Illustration · 13×72 REACHMAT with 12″ vinyl
1 · StickSmooth 12″ vinyl or HTV onto the mat, square to the grid.
2 · LoadFeed REACHMAT straight in like a 13″ roll.
3 · CutSend the full-length design in one pass.
The real thing

Meet REACHMAT.

REACHMAT 72 long cutting mat, full length, on white
REACHMAT 7213 × 72 inches. The full banner on one mat.
Founder standing beside a REACHMAT 72 and a REACHMAT 48 held upright
Real scale48″ and 72″, stood up next to a person.
A 72-inch REACHMAT spanning the full rear window of an SUV
For scaleA REACHMAT 72 runs wider than an SUV’s rear window.
REACHMAT 48 long cutting mat on white
REACHMAT 4813 × 48 inches for decals, signs and most long cuts.
Close-up of the REACHMAT mandala, 1-inch grid and QR code
The detailsPrinted 1″ grid, mandala art and setup QR code.
REACHMAT sealed in its branded sleeve
Ships sealedSealed in its own sleeve, shipped rolled in a USPS Priority Mail box.
Sizes

Pick your length.

246810121416182022242628303234363840424446485052545658606264666870REACHMAThtvmat.com

REACHMAT 72

13 × 72 in
$41.99

For banners, long decals and full-length HTV runs.

Buy on Amazon Also on eBay
Specs

What you get.

Width
13 in (12.95″)
Lengths
48 in · 72 in
Holds
12″ vinyl & HTV rolls
Grip
Standard
Material
PVC, printed 1″ grid
Ships
Rolled, USPS Priority Mail
Setup guide

Cutting on REACHMAT.

  1. Peel the protective sheet and smooth your 12″ vinyl or HTV onto the mat, square to the grid.
  2. In Design Space, set up the cut for matless (13″ roll) loading and set the material length to the mat: 48″ or 72″.
  3. Load REACHMAT straight against the machine's guides, the same way you load a 13″ roll.
  4. Cut, unload, weed. Put the protective sheet back on the mat.
How do I keep it sticky?

Put the protective sheet back on after every project, store it flat, and lift lint off with a lint roller.

My mat arrived rolled. Is that OK?

Yes. REACHMAT ships rolled so it arrives undamaged. Unroll it and lay it flat (in the sun if you can) for about 30 minutes and it relaxes flat. Between projects, store it flat or hang it from the hole at the end so it feeds straight.

Is REACHMAT made by a cutting-machine brand?

No. REACHMAT is an independent product by HTVmat and is not made by or affiliated with any cutting-machine manufacturer.